Welsh Government
Specified generator permits are standalone permits. They only cover emissions of SO2, NOx and dust to air. There are no permit conditions for water, land, energy efficiency, odour or noise.
There are 3 types of permits for specified generators, a:
- standard rules permit low risk
- simple bespoke permit low risk
- complex bespoke permit high risk
Find information on what to do if your specified generator is already permitted, for example, if you have:
- an IED installations environmental permit
- a local authority Part B section 1.1 or 5.1 activity permit
Before you apply
Check you have all the information you need, including the deadlines you must meet. Read the guidance Specified generator: when you need a permit to check:
- if you need to apply for a specified generator permit
- the deadlines for all specified generators and the date you must have a permit in place
You can apply for a site permit if you are operating:
- an individual specified generator
- 2 or more generators for the same purpose
Read the guidance Aggregating generators and deadlines for a specified generator site to find out how to aggregate the generators and the date you must have a permit in place.
For all types of permit you need to apply in time for the regulator to determine your application.
In:
- England, apply to the Environment Agency using these details and application forms
- Wales, apply to Natural Resources Wales use their details and application forms
Standard rules permits
To apply for a standard rules permit you must be able to meet the rules set out in the permit. If you cannot, you must apply for a bespoke permit.
See the standard rules permits available for low risk Tranche B specified generators. Their suitability ranges from small base load combined heat and power systems to peaking abated diesel engines. You can only use them if your site only has Tranche B specified generators, not a mixture of As and Bs.
First, verify the standard rule permit you are applying for. You can use the application form to do this. Select a standard rule set from the application tab and complete the details tab with information about your generators. The form calculates the figures you entered to verify whether you can apply for the standard rules permit you have selected.
Apply for a standard rules permit
You must provide the following information when you submit your application.
About you
You must provide:
- information about the applicant
- the address of the registered office
You must declare if you or any member of your organisation has:
- any conviction of a relevant offence
- current or past bankruptcy or insolvency proceedings against you
About your operation
You must select the standard rules permit you are applying for and provide the site or generators:
- location site name, address and postcode
- the Nomenclature of Economic Activities (NACE) code for the activity
You must also provide:
- generator name
- location national grid reference or latitude and longitude
- status Tranche A or Tranche B
- rated thermal input (MWth)
- type of generator such as diesel engine, gas turbine, dual fuel engine, other engine or MCP (medium combustion plant)
- type and portion of fuels used as set out in the fuel categories in Annex 2 MCPD (Medium Combustion Plant Directive)
- stack height
- expected annual operating hours and average load in use
- whether its in an AQMA (Air Quality Management Area) or will be deployed to an AQMA
- the distance from places where people live or work (human receptors)
Management system
You must declare the type of management system you have and that it meets the conditions in the standard rules permit.
Emission limit value (ELV) compliance verification
You must monitor each individual generator as specified in the permit conditions.
As part of your application you must be able to demonstrate that you can meetELVsusingMonitoring stack emissions: low risk MCPs and specified generators.
Charges for standard rules permits
The charges for specified generator standard rules permits.
Specified generators standard rules permits SR2018 No 1, SR2018 No 2, SR2018 No 3, SR2018 No 4, SR2018 No 5, SR2018 No 6, and SR2018 No 9:
- application charge 221
- transfer charge 169
- surrender charge 125
- annual subsistence charge 246
SR2018 No 8 mobile plant generator:
- application charge 221
- transfer charge 169
- surrender charge 125
- annual subsistence charge 273
- deployment no charge
Where the plant is also a new MCP additional charges may apply depending on the number of new MCPs. Find charges for standard rules permits in the Environmental permit and abstraction licensing: tables of charges: see Table 1.10 (combustion and power) for the application charges and Table 2.10 (combustion and power) for subsistence charges.
Get help with your standard rules application
See guidance on how to get help with your application in England.
In Wales, email mcpd.queries@naturalresourceswales.gov.uk for help.
Complete and submit the standard rules permit application form
Complete the application form.
Email it to mcpd-application@environment-agency.gov.uk.
If you cannot use the form or you have any issues with it, please contact mcpd-application@environment-agency.gov.uk.
Bespoke permits
You must apply for a bespoke permit if you cannot meet the conditions in a standard rules permit.
There are 2 types:
- simple bespoke (low risk) does not require detailed air dispersion modelling
- complex bespoke (high risk) does require detailed air dispersion modelling
Read the following guidance to see:
- which type of bespoke permit you must apply for
- what information you must provide in addition to that required for a standard rules permit
Air emissions risk assessment
You can use theEnvironment Age