GovWire

class="gem-c-govspeak govuk-govspeak govuk-!-margin-bottom-0">

How much youll be paid

17.83 per tree

How this item benefits the environment

An agroforestry system creates a range of benefits and support the main output of the farm by:

• reducing soil erosion
• providing shelter and shade for livestock
• mitigating the impacts of climate change
• improving water and air quality
• helping to mitigate flood risk

Where you can use this item

You can use this item to plant fruit trees that make up an in-field agroforestry system before applying for a maintenance action (see the Other items and actions you can use with this item section below for more information).

In-field agroforestry is where trees are deliberately combined with agriculture on the same piece of land.

Before you plant in-field agroforestry trees, you must check the sensitivity of the land you plan to plant on using the SFI Agroforestry data layer.

If a Sustainable Farming Incentive (SFI) action has less sensitive land in its title, it refers to land marked as low sensitivity on the data layer.

Planting on low sensitivity land

If youre planning to plant trees on low sensitivity land, you do not need an agroforestry plan if youre planning to plant at a:

• very low density (30 to 50 trees per hectare)
• low density (51 to 130 trees per hectare)

If youre planning to plant trees at a medium or high density (131 trees or more per hectare), you must have an agroforestry plan approved by the Forestry Commission before you can apply for this capital item. You may also need to complete a forestry Environmental Impact Assessment (EIA) the Forestry Commission will advise you on this. Read the Environmental Impact Assessments for woodland guidance for more information.

Planting on more sensitive land

You must have an agroforestry plan approved by the Forestry Commission before you can apply for this capital item on more sensitive land, regardless of the planned density of the trees.

More sensitive land is any land not classed as low sensitivity on the SFI Agroforestry data layer.

You may also need to complete a forestry EIA the Forestry Commission will advise you on this. Read the Environmental Impact Assessments for woodland guidance for more information. This also includes a list of sensitive land.

You should check if youre in a protected landscape before you start planting and consider any local guidance on tree planting.

You should also check if you need a forestry environmental impact assessment (EIA).

The Forestry Commission may serve you an enforcement notice if it finds you:

• are carrying out work subject to forestry EIA regulations without consent
• have breached the conditions of a previously granted consent

An enforcement notice will require you to restore the land to its previous condition, among other things. Failure to comply with an enforcement notice carries a penalty on conviction of an unlimited fine.

You may require a screening decision under the agricultural EIA regulation when planting:

• on uncultivated land and semi-natural areas (including historic features) to avoid damage through increases in agricultural productivity
• on rural land to prevent damage from physical restructuring (including but not limited to adding, removing or changing the type of fencing or adding, removing or moving materials including soil)

Breeding waders on low sensitivity land

If you have breeding waders on your land you must do an agroforestry plan to show how you will mitigate any impact on them. Breeding waders include:

• lapwing
• redshank
• curlew
• snipe
• oystercatcher
• stone curlew

If youre planting trees on low sensitivity land at a low or very low density (130 trees or fewer per ha), you must not plant on any historic or archaeological features identified on your Historic Environment Farm Environment Record (HEFER).

You must also not plant trees where they could damage protected sites, including:

• sites of special scientific interest (SSSIs)
• special areas of conservation (SACs)
• special protection areas (SPAs)
• Ramsar sites

Buffer zones

You may need to create a treeless buffer zone if youre planting near:

• protected sites
• scheduled monuments
• registered parks and gardens
• registered battlefields

If youre planting on low sensitivity land and have chosen to create an agroforestry plan, it should include details of any buffer zones you may need to create.

What you must do to use this item

If you use this item for Countryside Stewardship Higher Tier, you must ensure you have any consents or permissions in place before you start work.

When planning an in-field agroforestry system with fruit trees, you must:

• follow the agroforestry plan for planting, if applicable
• plant trees using the pattern of planting and densities set out in table 1
• supply and plant fruit trees with vigorous or semi-vigorous rootstocks by checking the agroforestry eligible species list
• only use named cultivar trees
• plant bare-rooted fruit trees between November and March, while they are not in leaf
• select planting stock that complies with the Forest Reproductive Material Regulations 2002 (where applicable) and is appropriate in size and stock type to site and prevailing conditions
• use trees that are free from pests and diseases (get your plants from nurseries with plant health management standards in place, such as Plant Healthy certification or similar)
• supply and plant fruit trees with vigorous or semi-vigorous rootstocks by checking the agroforestry eligible species list

When planting an in-field agroforestry tree you must:

• remove all grass and weeds in a 1 metre (m) diameter circle around each tree station before planting
• keep young trees weed free for 3 years using a mulch, an appropriate herbicide or weeding by hand
• use tree species appropriate for the soil and climatic conditions that support the planting objectives
• create a suitable planting position by spraying herbicide in advance, scarifying in lines or preparing a bare patch of land (screefing) with a spade
• use a planting method that helps survival, with roots fully inserted in the ground with the root collar at ground level (the tree must be firmed in without damaging the stem)
• plant the trees in a pit deep and wide enough to contain the full depth and width of the root system with room to spare
• make sure the trees graft union is at least 75mm above ground level
• protect young trees from livestock and grazing animals

Once the trees are established you must:

• stake standard trees and tie them securely (maiden trees can be established successfully without staking)
• tie the tree to the stake above the grafting union so its held firmly upright but some movement is allowed
• use flexible and adjustable tree ties to prevent wind damage, such as rubber ties
• maintain the stakes and ties until the tree is established, loosening the ties if they cut into the tree
• remove the ties once the tree is established and no longer requires support
• if using tree guards, make sure they allow access to the tree for formative pruning, applying mulch and clearing vegetation around the base
• maintain protection until the trees are big enough to survive potential threats
• replace all dead plants in the following planting season (each grant funded tree must be alive and in good condition by the end of an agreement)
• retain trees for at least 10 yea
  

  View the original news story